Yazar "Ene, Antoanetal" seçeneğine göre listele

Listeleniyor 1 - 1 / 1
  • Küçük Resim
    Öğe
    Transmission factors, mechanical, and gamma ray attenuation properties of barium-phosphate-tungsten glasses: Incorporation impact of WO3
    (Elsevier Science, 2022) Almisned, Ghada; Tekin, Hüseyin Ozan; Rammah, Yasser S.; Emad, Ahmed M.; Fatema, Ali T.; Elshami, Wiam; Ene, Antoanetal
    The purpose of this study is to conduct a thorough examination of the direct and indirect impacts of increasing the quantity of heavy WO3 on gamma-ray transmission, shielding and mechanical properties for some selected barium-phosphate-tungsten glasses. Accordingly, mechanical prop- erties of barium-phosphate-tungsten oxides with chemical formula (50-x)P2O5-50BaO-xWO3 (x = 0.0(S1), 5.0(S2), 10(S3), and 15(S4)) mol% was evaluated using Makishima-Mackenzie model. Next, newly online Phy-X/PSD software and Monte Carlo code were used to examine the gamma radiation characteristics. Gamma-ray transmission factor (TF) values were calculated for S1, S2, S3 and, S4 glass samples for a range of well-known radioisotope energies such for 67Ga, 57Co-57, 111In-111, 133Ba, 201Tl, 99 mTc, 51Cr, 131I, 58Co, 137Cs, 60Co. The total packing density (Vt) was enhanced from 0.589 for S1 glass sample (free with WO3) to 0.605 for S4 glass sample (with highest WO3 =15 mol%). The total energy dissociation (Gt) of the investigated glasses was increased with increasing the WO3 content: from 51.7 (kJ/cm3) for S1 glasses to 52.45 (kJ/cm3) For S4 glasses. All mechanical moduli were improved with increasing the tungsten trioxide con- centration in the studied glasses. Poisson’s ratios were increased with increasing the WO3 con- centration. The trend of linear (LAC) and mass attenuation (MAC) coefficients were followed as: (LAC, MAC) S1 < (LAC, MAC) S2 < (LAC, MAC) S3 < (LAC, MAC) S4. Half (HVL) and tenth (TVL) value layers have the trend as (HVL, TVL) S1 > (HVL, TVL) S2 > (HVL, TVL) S3 > (HVL, TVL) S4. The effective atomic number (Zeff) and electron density (Neff) have the same trend. The lowest transmission Factor (TF) values for all glass specimens were examined at a thickness of 3 cm. Furthermore, the S4 sample displayed the least transmission tendency across all glass thicknesses evaluated.