Show simple item record

dc.contributor.authorIssa, Shams A.M.
dc.contributor.authorTekin H.O.
dc.contributor.authorSaudi, H.A.
dc.contributor.authorKoubisy, M.S.I.
dc.contributor.authorZhukovsky, M.
dc.contributor.authorAli, Ahmed S.
dc.contributor.authorZakaly, Hesham M.H.
dc.date.accessioned2022-04-25T08:31:25Z
dc.date.available2022-04-25T08:31:25Z
dc.date.issued2022en_US
dc.identifier.citationIssa, S. A. M., Tekin, H. O., Saudi, H. A., Koubisy, M. S. I., Zhukovsky, M., Ali, A. S., & Zakaly, H. M. H. (2022). Fabrication of newly developed tungsten III-oxide glass family: Physical, structural, mechanical, radiation shielding effectiveness. Optik, 259 doi:10.1016/j.ijleo.2022.169025en_US
dc.identifier.issn0030-4026
dc.identifier.urihttps://10.1016/j.ijleo.2022.169025
dc.identifier.urihttps://hdl.handle.net/20.500.12713/2659
dc.description.abstractA series of glasses based on the nominal composition of (Na2O)5 + (Al2O3)10 + (SiO2)(85+x)/2 + (CaO)(85+x)/2 + (WO3)x glasses system were produced utilizing the usual melt quenching process in this study. Experimental techniques and the FLUKA Monte Carlo algorithm were used to examine the properties of silicon-calcium glasses containing tungstate-III-oxide. For five glass structures identified according to (Na2O)5+(Al2O3)10+(SiO2)(85+x)/2+(CaO)(85+x)/2+(WO3)x (0 ≤x ≤ 20 wt-%) glass composition, the impact of tungstate-III-oxide with ratios of (0 ≤x ≤ 20 wtpercent) on radiation shielding characteristics of glasses was set. The densities of the produced glasses fluctuated between 2.847 g/cm3 and 3.122 g/cm3 when tungstate-III-oxide was substituted. The produced sample densities, which are important in assessing radiation shielding features, rose as the WO3 concentration increased, according to our first results. In addition, the structure of each sample was studied using FT-IR. FT-IR showed that when WO3 levels rose, the connection level increased, and the FT-IR spectra shifted to higher wavenumbers. The synthesis of WO3 in a glass matrix enhances the structural network by raising oxygen levels, which leads to the transition of SiO2 into - CaO. Elastic moduli and Ultrasonic velocities were found to rise as the ratio of WO3 in the generated samples increased. These two approaches were used to model linear and mass attenuation coefficients, photons-transmittance versus photon energy, radiation protection efficiency against photon energy, and absorber thickness (experimental and simulation). Based on the results, it can be stated that the w20 sample, which contains 20 wt%, will play the most effective function in radiation shielding. Increases in WO3 led in considerable increases in linear and mass attenuation coefficient values, which directly contribute to the development of the glass's radiation shielding characteristics. © 2022 Elsevier GmbHen_US
dc.language.isoengen_US
dc.publisherElsevier GmbHen_US
dc.relation.isversionof10.1016/j.ijleo.2022.169025en_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectFTIRen_US
dc.subjectRadiation Shieldingen_US
dc.subjectStructural Propertiesen_US
dc.subjectTungsten Trioxideen_US
dc.titleFabrication of newly developed tungsten III-oxide glass family: Physical, structural, mechanical, radiation shielding effectivenessen_US
dc.typearticleen_US
dc.contributor.departmentİstinye Üniversitesi, Mühendislik ve Doğa Bilimleri Fakültesi, Bilgisayar Mühendisliği Bölümüen_US
dc.contributor.authorID0000-0002-0997-3488en_US
dc.contributor.institutionauthorTekin, Huseyin Ozan
dc.identifier.volume259en_US
dc.relation.journalOptiken_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.contributor.scopusauthorid56971130700en_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record