Solid particle erosion and scratch behavior of novel scrap carbon fiber/glass fabric/polyamide 6.6 hybrid composites

Basit Öğe Kaydı
dc.authoridOzkoc, Guralp/0000-0002-3194-5256
dc.authoridkocoglu, hurol/0000-0002-7546-6222
dc.authoridKORKUSUZ, ORKAN BARAN/0000-0002-3248-2249
dc.authorwosidOzkoc, Guralp/F-7917-2018
dc.contributor.authorKocoglu, Hurol
dc.contributor.authorKorkusuz, Orkan Baran
dc.contributor.authorOzzaim, Pelin
dc.contributor.authorKodal, Mehmet
dc.contributor.authorAltan, M. Cengiz
dc.contributor.authorSinmazcelik, Tamer
dc.contributor.authorOzcelik, Babur
dc.date.accessioned2024-05-19T14:46:15Z
dc.date.available2024-05-19T14:46:15Z
dc.date.issued2023
dc.departmentİstinye Üniversitesien_US
dc.description.abstractThis study investigated the tribological performance of hybrid composites composed of scrap carbon fiber (CF), glass fabric (GF), and polyamide 6.6 (PA6.6) through an innovative approach for reusing scrap CFs in high-value composite structures. The experimental setup included CF/GF/PA6.6 hybrid composite laminates with varying CF contents and surface-modified GFs, as well as PA6.6 sheets and GF/PA6.6 composite laminates. Solid particle erosion and scratch tests were conducted to assess the influence of scrap CF hybridization and GF surface modification on the tribological properties of the composites. The results demonstrated that neat PA6.6 sheets exhibited the lowest erosion rate, while the incorporation of CF and GF reinforcements had a detrimental effect on erosion resistance. The highest erosion rate was observed within the impact angle range of 15 degrees -30 degrees for pure PA6.6 sheets, whereas for composite laminates, it occurred within the range of 30 degrees-45 degrees. In contrast, CFs positively affected scratch hardness despite their negative impact on erosion resistance. Additionally, the silane treatment of GFs, which enhanced interfacial strength, improved the erosion resistance and scratch hardness of GF/PA6.6 composite laminates without CF. Profilometer-based topographic analysis revealed a correlation between the average surface roughness of the eroded surfaces and the weight loss resulting from solid particle erosion.en_US
dc.identifier.doi10.1002/pc.27627
dc.identifier.endpage7211en_US
dc.identifier.issn0272-8397
dc.identifier.issn1548-0569
dc.identifier.issue10en_US
dc.identifier.scopus2-s2.0-85166742893en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage7197en_US
dc.identifier.urihttps://doi.org10.1002/pc.27627
dc.identifier.urihttps://hdl.handle.net/20.500.12713/5480
dc.identifier.volume44en_US
dc.identifier.wosWOS:001042830300001en_US
dc.identifier.wosqualityN/Aen_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherWileyen_US
dc.relation.ispartofPolymer Compositesen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.snmz20240519_kaen_US
dc.subjectPolymer Matrix Compositesen_US
dc.subjectScrap Carbon Fiberen_US
dc.subjectSilane Treatmenten_US
dc.subjectSurface Analysisen_US
dc.subjectWearen_US
dc.titleSolid particle erosion and scratch behavior of novel scrap carbon fiber/glass fabric/polyamide 6.6 hybrid compositesen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu