Induced crystallization and enhanced light absorption and optical conduction in WO3 films via pulsed laser welding technique
Yükleniyor...
Tarih
2023
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Springer
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
Herein amorphous WO3 thin films prepared by the thermal evaporation technique under a vacuum pressure of 10? 5 mbar are treated via pulsed laser welding technique (PLW) in an argon atmosphere. An induced crystallization process within one second for a spot of diameter of 2 mm is achieved via this technique. The crystalline films exhibited hexagonal structure and showed cuboid grains of dimensions of (length × width) 4.6 × 1.1 (?m)2. In addition, the PLW treated tungsten oxide thin films exhibited enhanced light absorbability reaching 90 times at 3.09 eV. Moreover in addition to the existing indirect energy band gap (3.50 eV) of WO3 films, the PLW treatment resulted in formation of another direct energy band gap of value of 1.92 eV. The pulsed laser welding of the WO3 films increased the optical conductivity of the films by 66 times and shifted the plasmon frequency from 0.19 to 6.99 GHz. The free charge carrier density also increased by two orders of magnitude. On the other hand, the impedance spectroscopy studies have shown domination of negative capacitance effect in samples treated with PLW technique. The conversion of the structure of the films from amorphous to polycrystalline that is associated with enhanced light absorption and improved optical conduction which is achieved within 41 s for a large area of 1.25 cm2 of the films is accounted as a smart new approach for improving the physical properties of thin films.
Açıklama
Anahtar Kelimeler
WO3 Thin Films, Pulsed Laser Welding, Induced Crystallization, Enhanced Absorption
Kaynak
Optical and Quantum Electronics
WoS Q Değeri
Q2
Scopus Q Değeri
N/A
Cilt
55
Sayı
3
Künye
Alfhaid, L. H. K., & Qasrawi, A. F. (2023). Induced crystallization and enhanced light absorption and optical conduction in WO3 films via pulsed laser welding technique. Optical and Quantum Electronics, 55(5) doi:10.1007/s11082-023-04738-4