Pyrolytic conversion of automotive bumper polywaste to diesel like fuel and its utilization in compression ignition engine
Yükleniyor...
Dosyalar
Tarih
2022
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Elsevier Ltd
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
In present scenario, alternate fuels for vehicle usage is aimed to satisfy the increasing energy demand significantly caused by fossil fuel depletion and global warming increase around the world. In today's world, plastics are the most indispensable material and their use in automobiles are increasing day by day. Many vehicles are scrapped year by year, from which plastic waste can be converted as usable fuel. This paper deals with analyzing the performance of diesel like fuel obtained by pyrolysis process from bumper waste and to study its emission and combustion behavior by using it in a compression ignition (CI) engine. For extraction, pyrolysis process was adopted and temperature was maintained at 240–360 °C. Fuel property testing was done on the resultant oil collected. It was then blended with diesel in the proportions of WBO P20, WBO P30, WBO P60, and WBO P80 with diesel and tested in a CI engine and its results analyzed. The results show WBO P20 is better with 31.43% BTE, 0.153% of CO emission, 1595 ppm of NO emission, 65.7% of smoke emission and 118 ppm of HC emissions slightly higher than diesel. The cylinder peak pressure for WBO P20 was found to be 71.08 bar and peak heat release was found to be 45.93 J/deg CA which matches diesel combustion. © 2022 Elsevier Ltd
Açıklama
Anahtar Kelimeler
And Waste to Energy, Automotive Bumper Polywaste, Combustion, Diesel Engine, Exhaust Emission, Performance, Waste Bumper Oil
Kaynak
Fuel
WoS Q Değeri
Q1
Scopus Q Değeri
Q1
Cilt
318
Sayı
Künye
Kiran, S., & Varuvel, E. G. (2022). Pyrolytic conversion of automotive bumper polywaste to diesel like fuel and its utilization in compression ignition engine. Fuel, 318 doi:10.1016/j.fuel.2022.123559
