Effect of coffee thermocycling on the surface roughness and stainability of denture base materials with different chemical compositions manufactured with additive and subtractive technologies
Küçük Resim Yok
Tarih
2024
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Wiley
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
ObjectiveTo evaluate the effect of coffee thermocycling (CTC) on the surface roughness (Ra) and stainability of denture base materials with different chemical compositions fabricated by using additive and subtractive manufacturing.Materials and MethodsDisk-shaped specimens were additively (FREEPRINT denture, AM) or subtractively (G-CAM, GSM and M-PM, SM) fabricated from three pink denture base materials in different chemical compositions (n = 10). Ra was measured before and after polishing, while color coordinates were measured after polishing. Specimens were subjected to CTC (5000 cycles) and measurements were repeated. Color differences (& UDelta;E00) after CTC were calculated. Ra among different time intervals within materials was evaluated by using repeated measures analysis of variance (ANOVA), while 1-way ANOVA was used to evaluate the Ra of different materials within each time interval and the & UDelta;E00 values. Color coordinates within each material were compared by using paired samples t-tests (a = 0.05).ResultsRa before polishing was the highest for all materials (p < 0.001), while SM had its lowest Ra after CTC and AM had its lowest Ra after polishing (p & LE; 0.008). Before polishing, AM had the highest Ra among the materials (p < 0.001). After polishing, SM had higher Ra than AM (p < 0.001). After CTC, GSM had the lowest Ra (p & LE; 0.048). SM had the lowest (p & LE; 0.031) and AM had the highest (p < 0.001) & UDelta;E00. CTC decreased the a* and b* values of SM and AM (p & LE; 0.017), and increased the L* values of AM (p < 0.001).ConclusionsPolishing significantly reduced the surface roughness of all materials. CTC did not increase the surface roughness of materials above the clinically acceptable threshold. Only AM had perceptible color change when previously reported threshold values for denture base materials were considered.Clinical SignificanceTested denture base materials may have similar surface stability after coffee thermocycling. However, subtractively manufactured denture base materials may have improved color stability when subjected to long-term coffee consumption.
Açıklama
Anahtar Kelimeler
Cad-Cam, Coffee Thermocycling, Denture Base, Roughness, Stainability
Kaynak
Journal of Esthetic and Restorative Dentistry
WoS Q Değeri
N/A
Scopus Q Değeri
Q1
Cilt
36
Sayı
3
