Influence of cement shade, ceramic thickness, and airborne-particle abrasion of titanium surface on the final color of monolithic lithium disilicate glass-ceramic hybrid-abutment systems in vitro

Basit Öğe Kaydı
dc.authoridÖnjen Tak / 0000-0002-3578-9078en_US
dc.authorscopusidÖnjen Tak / 23101443200
dc.authorwosidÖnjen Tak / HDZ-8870-2022en_US
dc.contributor.authorElter, Bahar
dc.contributor.authorTak, Önjen
dc.date.accessioned2022-11-14T11:40:56Z
dc.date.available2022-11-14T11:40:56Z
dc.date.issued2022en_US
dc.departmentİstinye Üniversitesi, Diş Hekimliği Fakültesi, Klinik Bilimler Bölümüen_US
dc.description.abstractObjectives:The purpose of this in vitro study was to evaluate the influence of the ceramic thickness, cement shade, and airborne -particle abrasion of the titanium on the final color of titanium base cemented lithium disilicate glass-ceramic restorations.Method and materials: In total, 144 lithium disilicate glass -ce-ramic disks of three thicknesses (0.5, 1.0, and 1.5 mm) were ce-mented to airborne-particle-abraded and non -airborne-particle -abraded titanium disks with six adhesive resin cements. The color measurements were performed with a clinical spectrophotometer. The mean and standard deviation of evaluated AE values were calculated. A three-way analysis of variance (ANOVA) was used for analyzing the data. Statistical analyses were computed with a sig-nificance level of alpha = .05 using a statistical software program (Minitab 17, Minitab). Results:The 0.5-and 1-mm-thick ceramic specimens cemented with Panavia V5 Opaque showed the lowest AE values when cemented on both non-airborne-particle-abraded (5.62 +/- 1.66, 3.15 +/- 1.28) and airborne-particle-abraded (5.55 +/- 0.86, 3.16 +/- 0.49) surfaces, while the highest values were seen in the groups cemented with RelyX U200 A2 (29.22 +/- 0.83, 17.23 +/- 0.45) and Panavia V5 A2 (29.94 +/- 1.17, 16.71 +/- 0.44) on airborne -particle-abraded surfaces. For the 1.5-mm-thick ceramics, the lowest AE values were seen when Multilink MO 0 cement was used on non-airborne -particle-abraded surfaces (1.56 +/- 0.29) and when Panavia V5 Opaque was used on airborne-particle-abraded surfaces (1.56 +/- 0.66). The highest values were seen when RelyX U200 A2 (9.77 +/- 1.13), PA2 (9.24 +/- 0.25), and Multilink HO 0 (9.19 +/- 1.33) were used on airborne-particle-abraded surfaces, and when Multilink HO 0 (9.61 +/- 1.70) was used on non-airborne -parti-cle-abraded surfaces. The 1-mm-thick ceramics cemented with Multilink HO 0 showed higher AE values (12.05 +/- 1.99) for airborne- particle-abraded and non-airborne-particle-abraded (12.58 +/- 1.06) than thinner (0.5 mm) or thicker (1.5 mm) ceramics. Conclusion: Thinnest ceramic superstructures resulted in the highest AE val-ues. Cements that mask the underlying color reflect their own shade under thin superstructures. Airborne-particle abrasion of titanium surfaces increases the grayish reflectance if cement shade does not have the color masking ability.en_US
dc.identifier.citationElter, B., & Tak, Ö. (2022). Influence of cement shade, ceramic thickness, and airborne-particle abrasion of titanium surface on the final color of monolithic lithium disilicate glass-ceramic hybrid-abutment systems in vitro. Quintessence International (Berlin, Germany: 1985).en_US
dc.identifier.doi10.3290/j.qi.b3045089en_US
dc.identifier.endpage688en_US
dc.identifier.issn0033-6572en_US
dc.identifier.issn1936-7163en_US
dc.identifier.issue8en_US
dc.identifier.scopus2-s2.0-85136909717en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage678en_US
dc.identifier.urihttp://dx.doi.org/10.3290/j.qi.b3045089
dc.identifier.urihttps://hdl.handle.net/20.500.12713/3387
dc.identifier.volume53en_US
dc.identifier.wosWOS:000877949500004en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.institutionauthorTak, Önjen
dc.language.isoenen_US
dc.publisherQUINTESSENCE PUBLISHING CO INCen_US
dc.relation.ispartofQUINTESSENCE INTERNATIONALen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectAdhesive Cementen_US
dc.subjectAirborne -Particle Abrasionen_US
dc.subjectColoren_US
dc.subjectCustom Abutmenten_US
dc.subjectTitanium Baseen_US
dc.titleInfluence of cement shade, ceramic thickness, and airborne-particle abrasion of titanium surface on the final color of monolithic lithium disilicate glass-ceramic hybrid-abutment systems in vitroen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
article.pdf
Boyut:
354.09 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir
Lisans paketi
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
license.txt
Boyut:
1.44 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama:
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Klinik Bilimler Bölümü Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu